|Filter Area:||10㎡||Model:||HK-5 Carbon Steel|
|Work Pressure:||0.5M Pa||Color:||Customized|
|Work Temperature:||180℃||Filter Element:||Stainless Steel Filter Cartridge|
2000μM Automatic Self Cleaning Filter,
Automatic Self Cleaning Filter,
2000μM self cleaning purifier
Carbon steel , filter area 8㎡ , mechanical cleaning filter , Filtration Rating 20-2000μm
The working principle of self-cleaning filter:
This process is managed by an automatic control system, which starts and stops a motor, which opens and closes the automatic drain valve. Clean the filter without interrupting the outlet flow.
Working principle of self-cleaning filter:
The self-cleaning filtration system is designed to automatically and continuously remove solid particles by backwashing the filter element from 25 μ m to 6000 μ M. The filtered liquid can be different: sea water, well water, groundwater, river water and surface water, crude oil, fuel oil, etc. Building materials can range from cast iron, carbon steel and stainless steel to special AUSTENITIC FERRITIC STEELS such as custom-made duplex, super duplex, nickel alloys and titanium. These filters are designed in accordance with all international design codes (e.g. ASME, BS, VSR, etc.).
Advantages of self cleaning filter:
1) Increase productivity
2) Improve product quality
3) There is no ongoing cost or disposal cost of replacing filter materials
4) Fully enclosed, which means smoke-free and limited access to liquids for operators
|Model||HK-5 Carbon Steel|
|Filter Area||10 M2|
|Work Pressure||0.5 Mpa|
|Work Temperature||180 ℃|
|Filter Element||Stainless Steel Filter Cartridge
Features of self-cleaning filter:
Compact body, firm and reliable structure
Low water consumption for backwashing, low water demand
High filtration accuracy, suitable for various water quality
Backwash decompression is small and does not affect normal water supply
Features of self-cleaning filter:
Automatic backwash filter, also known as self-cleaning filter, is the best solution for continuous separation of large and small particles in oil and gas. Water and wastewater treatment plants.
Principle of self-cleaning filter:
The self-cleaning filter system automatically and continuously removes solid particles from 25 µm to 6000 µm through the backwash filter element. The filtered liquid can be different: sea water, well water, ground water, river water and surface water, crude oil, fuel oil, etc. Building materials can range from cast iron, carbon steel and stainless steel to special austenitic ferritic steels such as duplex, super duplex, nickel alloys and custom sizes of titanium. These filters are designed according to all international design codes, such as ASME, BS, VSR, etc.
The raw water enters from the inlet of the filter, passes through the filter screen, and the clean water flows through the outlet of the filter. The surface of the inner filter screen gradually accumulates with dirt, causing the filter cake to develop, and the pressure difference on the filter screen increases accordingly. The pressure difference switch detects the pressure difference, and when the pressure difference reaches a preset value, the cleaning process starts.
Once the pressure loss (ΔP) on the filter reaches a preset value (usually 0.5 bar (7psi), the filter screen is automatically cleaned. The flushing valve opens, the pressure is released from the hydraulic piston, and a clean water is discharged through the flushing valve. The motor is simultaneously The dust collector rotates and moves along its axis. The combination of vertical movement and rotation ensures that the suction nozzle will cover the entire internal filter surface and effectively clean the filter. The entire process takes 5 seconds. The entire process has uninterrupted water supply.
Comprehensive parameters of self-cleaning filter
Operating flow: 20-5000m3/h
Please contact us for details, different water quality & accuracy, corresponding flow rate is different
Minimum working pressure: 2Kg
Low working pressure can be set up in the sewage outlet booster pump equipment
Maximum working pressure: 10Kg;150psi
According to the user request can be customized high pressure, details contact us
Filtration area: 3000cm2 -20000 cm2
Inlet/outlet diameter:,80,100,150,200,250,300,350,400,500,600,800 50 mm;
Maximum operating temperature: 70°C;
Above this temperature please specify
Anping Hanke Filter Technology Co.,Ltd is established in 2005 in Anping,China.We are manufacturer of pleated filter, sintered filter,filter disc ,tube filter,slot filter,basket filter etc various filter products and woven wire mesh.
We have approved ISO9001 in 2013.WE introduce advannced production and testing equipment,production technology from abroad,and adopts word-class quality filter material as the main filter element material,specializing in the production of porous metal sintered materials as the main filter material and filter element.Except for good quality,we supply technical support,reliable filtration solution and satisfied service.We help users’ production be more efficient.
Contact Person: Sunny