|
Product Details:
|
| Product Name: | Stainless Steel Bag Filter | Another Name: | Bag Filter |
|---|---|---|---|
| MAQ: | 1 SET | Original: | China |
| Packages: | Box | Bag Material: | PP, PE, Stainless Steel |
| Housing Material: | SS304, SS316 | Transport: | Air, Sea, Express |
| Bags Nos.: | 1-24 | Filter Media: | Water, Oil, Paint, Dairy Products |
| High Light: | 12m2 ss bag filter housing,polymer filtration ss bag filter housing,1.6mpa ss bag filter housing |
||
12m2 Oil and polymer filtration 1.6Mpa Stainless Steel Bag Filter
Stainless Steel Bag Filter Type:
Bag filter is divided into single bag filter and multi bag filter according to the number of filter bags in the filter. According to the application environment (number of filters), it is divided into independent bag filter and double bag filter. Single bag filter is used in the pipeline system that can stop flow for cleaning or replacing filter bags; The double bag filter is used in the pipeline system where the flow cannot be stopped for cleaning or replacing the filter bag.
Stainless Steel Bag Filter Working Principle:
Bag filter is installed at the front end of each supporting valve in the transmission pipeline. When the medium in the pipeline flows in from the filter inlet and sprays to the top of the filter, then enters the filter bag at the top of the filter for filtration, and then flows out from the filter outlet to the transmission pipeline at the other end, while impurities remain in the filter bag to prevent blockage of the transmission pipeline, To protect equipment pipes and fittings on pipes (such as water pumps, valves, etc.) from wear and blockage.
During the filtration process, the upstream pressure gradually increases until the bag is completely blocked. The filter delivery must then be stopped (independent bag filter) or transferred to another filter body (duplex bag filter) through a valve. Just open the lid and replace the filter bag.
Stainless Steel Bag Filter Parameters:
| Specifications | Filter Bag Model | Bag Nos. | Filtration Area m2 | Cylinder diameter | Inlet &outlet diameter | Design Pressure Mpa | Flow |
| DL-A | 01 | 1 | 0.25 | 200 | DN50 |
0.6 1.0 1.2 1.6 |
Flow rate determined according to the material type, viscosity, filtration accuracy, particle fineness, solid content and working pressure |
| DL-A | 02 | 1 | 0.50 | 200 | DN50 | ||
| DL-A-G | 01 | 1 | 0.25 | 219 | DN50 | ||
| DL-A-G | 02 | 1 | 1.00 | 219 | DN50 | ||
| DL-B(c))-02 | 02 | 2 | 1.50 | 400 | DN80 | ||
| DL-B(c))-03 | 02 | 3 | 2.00 | 450 | DN100 | ||
| DL-B(c))-04 | 02 | 4 | 2.50 | 500 | DN100 | ||
| DL-B(c))-05 | 02 | 5 | 3.00 | 550 | DN80 | ||
| DL-B(c))-06 | 02 | 6 | 3.50 | 600 | DN125 | ||
| DL-B(c))-07 | 02 | 7 | 4.00 | 650 | DN100 | ||
| DL-B(c))-08 | 02 | 8 | 4.50 | 700 | DN100 | ||
| DL-B(c))-09 | 02 | 9 | 4.50 | 750 | DN125 | ||
| DL-B(c))-10 | 02 | 10 | 5.00 | 800 | DN125 | ||
| DL-B-12 | 02 | 12 | 6.00 | 850 | DN150 | ||
| DL-B-14 | 02 | 14 | 7.00 | 950 | DN150 | ||
| DL-B-16 | 02 | 16 | 8.00 | 1000 | DN200 | ||
| DL-B-18 | 02 | 18 | 9.00 | 1100 | DN250 | ||
| DL-B-20 | 02 | 20 | 10.00 | 1150 | DN250 | ||
| DL-B-22 | 02 | 24 | 12.00 | 1250 | DN350 | ||
| Filter Bag Selection | PP/PE | Unit(um):0.5,1,5,10,25,50,75,100,200 | |||||
| Nylon | 10,20,30,50,60,80,100,120,150,200,250,300,400,500 | ||||||
Contact Person: Sunny
Tel: +8613031827161
